New Dashcams should always be tested for image quality and overall camera functionality
using the pre-installed firmware so vendor can't claim you damaged it
with incorrect firmware. Record test footage even in your hand indoors or out window then keep this
footage. Once Dash Cam passes functionality tests install in
vehicle as per instructions. At this point
if no Lens issues or obvious defects are noticed, you should install the most recent official Firmware.
This model attaches to windshield with single clip mount which requires applying foam pad to reduce mount vibration. This pad will deteriorate after about a year requiring replacement.
The vehicle interior in full
Sun in hot summer can reach damaging temperatures for any camera. The A119S Dash Cam will shut off at 75-80C, if you notice this behavior repeating internal damage will
occur.
Most effective ways to reduce A119 Dash Cam heat is:
- avoid 60fps and use 30fps
- use 16-24 Mb/s Bitrate in hot summer
- don't use Parking Mode in full sun for hours
- remove any internal or external tape blocking cooling vents (see Tips#1 video below)
As part of regular Maintenance owners should :
- format micro SD card every 2 months.
- reset Default Settings after each Firmware Update.
- when powered from GPS module clean contact plate every 6 months.
- always insert & remove micro SD card while Dashcam is off.
